Detecting Homologous Recombination in Family Pedigrees

Introduction

Accurate detection of recombination events is essential for linkage analysis, haplotype inference, and investigating disease associations with de novo recombination. While population-based phasing methods such as SHAPEIT and Beagle achieve high accuracy over short distances, switch error rates (arising from genotyping error and small gene conversions that are not associated with the long range recombination of large chromosomal regions) accumulate over long genetic distances, limiting their utility for chromosome-scale recombination inference. The inferRecom package builds on work by Chowdhury et al. (2009), who used analytic recombination detection to characterize recombination phenotypes and identify associated loci. This package detects recombination analytically in families with two parents and two or more children, applies a genetic distance and/or SNP-based filter to remove artifacts inconsistent with homologous recombination due to interference, implements chromosome-scale phasing at informative markers, and integrates with genomic visualization tools such as the UCSC Genome Browser and with the wider Bioconductor ecosystem. For two child families, the location of the recombination is identified, while in those with ≥3 children, the individual carrying the recombination is additionally inferred. The package has utility in nuclear family genome-wide analyses for a wide variety of applications including human disease, animal and plant studies and evolutionary research.

Installation

if (!requireNamespace("BiocManager", quietly = TRUE)) {
    install.packages("BiocManager")
}

BiocManager::install("inferRecom")
library(inferRecom)
library(rtracklayer)
library(trackViewer)

Detecting recombination

inferRecom enables rapid, accurate detection of meiotic recombination in nuclear families. The following vignette detects recombination in a simulated set of pedigrees of varying sizes, generated using the sim1000G package (Dimitromanolakis et al. 2019) from HapMap CEU genotypes (International HapMap 3 Consortium 2010) and formatted in PLINK binary format, which inferRecom reads with snpStats (Clayton 2026). These data are for demonstration only: recombination was simulated at a much higher rate than occurs in reality, so that the short example region contains many crossovers. The scripts that produced the example data are in the package’s scripts directory, system.file("scripts", package = "inferRecom"). The sex-specific recombination rate maps in Europeans used in this example were generated by Bhérer et al. (2017) and are available on GitHub.

This vignette also showcases several auxiliary functions that facilitate visualization, analysis of regions of homozygosity, and chromosome-scale phasing of informative markers.

Detecting putative recombination intervals

The first section demonstrates the core function xoDetect(), which localizes and individualizes recombination in families with both parents and three or more children, and localizes recombination in families with both parents and exactly two children. It filters artifacts arising from genotyping error and other experimental error using the default SNP-based criterion of five consecutive informative SNPs to confirm a recombination event (snpFilter), as well as a map-based criterion of one centiMorgan to confirm a recombination event (cmFilter).

# Detect recombinations in families with two parents and three or more children
#    and families with two parents and exactly two children
# Filter for recombination with SNP-based and cM-based filters at default values
# Option to select for only SNPs that have an rs number is disabled by default

exampleDir <- system.file("extdata", package = "inferRecom")
simCEU <- file.path(exampleDir, "simCEU")
mapFemale <- file.path(exampleDir, "female_chr4.txt")
mapMale <- file.path(exampleDir, "male_chr4.txt")

pat3 <- xoDetect(simCEU, mapMale,
    familySize = 3, parent = "father", caseControl = FALSE
)
mat3 <- xoDetect(simCEU, mapFemale,
    familySize = 3, parent = "mother", caseControl = FALSE
)
pat2 <- xoDetect(simCEU, mapMale, familySize = 2, parent = "father")
mat2 <- xoDetect(simCEU, mapFemale, familySize = 2, parent = "mother")

pat3
#> GRanges object with 3 ranges and 6 metadata columns:
#>       seqnames            ranges strand |     childId    familyId    startSnp
#>          <Rle>         <IRanges>  <Rle> | <character> <character> <character>
#>   [1]     chr4 78432058-78432285      * |        F6C2          F6  rs10026702
#>   [2]     chr4 78393878-78424195      * |        F8C3          F8   rs4450960
#>   [3]     chr4 78084453-78100731      * |        F8C5          F8  rs17327923
#>         finishSnp   startCm  finishCm
#>       <character> <numeric> <numeric>
#>   [1]  rs10026918   57.3462   57.3462
#>   [2]  rs17400095   57.3424   57.3462
#>   [3]   rs2645687   57.3172   57.3178
#>   -------
#>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

The output of the functions is a GRanges object (Lawrence et al. 2013) showing the individual/family IDs, SNP IDs, locations, and recombination rate map centiMorgan distances for each recombination. Given that families with two children do not have sufficient information to infer the recombinant child, the childId column is omitted in the output. If caseControl = TRUE, a GRangesList separated by case/control status is returned. The results with the default filtering parameters are shown below.

Filtering for double recombination

Filtering for closely-spaced events can remove genotyping error and other artefacts in the data that are not consistent with true homologous recombination. The default value for the SNP filter (snpFilter) is 5, and for the genetic-distance filter (cmFilter) is 1 cM. Setting cmFilter = 0 removes the genetic distance condition altogether. For comparison, the output below shows paternal recombinations in families with three or more children without the genetic distance filter.

pat3_0cM <- xoDetect(simCEU,
    mapMale,
    familySize = 3,
    parent = "father",
    caseControl = FALSE,
    cmFilter = 0
)

pat3_0cM
#> GRanges object with 5 ranges and 6 metadata columns:
#>       seqnames            ranges strand |     childId    familyId    startSnp
#>          <Rle>         <IRanges>  <Rle> | <character> <character> <character>
#>   [1]     chr4 78059331-78077129      * |        F6C1          F6  rs12502028
#>   [2]     chr4 78828799-78833246      * |        F6C1          F6  rs10518181
#>   [3]     chr4 78432058-78432285      * |        F6C2          F6  rs10026702
#>   [4]     chr4 78393878-78424195      * |        F8C3          F8   rs4450960
#>   [5]     chr4 78084453-78100731      * |        F8C5          F8  rs17327923
#>         finishSnp   startCm  finishCm
#>       <character> <numeric> <numeric>
#>   [1]   rs1874564   57.2841   57.3170
#>   [2]   rs6836305   57.6484   57.6484
#>   [3]  rs10026918   57.3462   57.3462
#>   [4]  rs17400095   57.3424   57.3462
#>   [5]   rs2645687   57.3172   57.3178
#>   -------
#>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

Removing the genetic distance filter results in the detection of two recombination intervals in child 1 in pedigree 6 that are separated by only 0.33cM (~750kb), which is unlikely to represent a true meiotic recombination due to interference in crossing over.

Visualizing xoDetect() output with trackViewer and rtracklayer

It is straightforward to visualize recombination intervals using the Bioconductor packages trackViewer (Ou and Zhu 2019) and rtracklayer (Lawrence et al. 2009). Here, case and control intervals are plotted for basic comparison using trackViewer.

mat3CC <- xoDetect(simCEU,
    mapFemale,
    familySize = 3,
    parent = "mother",
    caseControl = TRUE
)

# Add feature column for compatibility with "gene" type in trackViewer
mat3CC$case$feature <- "interval"
mat3CC$control$feature <- "interval"

caseTrack <- new(
    "track",
    dat = mat3CC$case,
    type = "gene",
    format = "BED"
)

setTrackStyleParam(caseTrack, "color", "black")

controlTrack <- new(
    "track",
    dat = mat3CC$control,
    type = "gene",
    format = "BED"
)

setTrackStyleParam(controlTrack, "color", "blue")

tl <- trackList(caseTrack, controlTrack)
viewRegion <- GRanges("chr4", IRanges(78000000, 79500000))
viewTracks(tl, gr = viewRegion, autoOptimizeStyle = TRUE)

While trackViewer provides convenient functionality for visualization entirely in an R environment, some intervals are not visible at this resolution. This and many other applications benefit from more interactive visualization directly in the UCSC Genome Browser. Example tracks as exported in the code below are shown in the browser alongside recombination maps and nearby genes.

export(mat3CC$case, "~/path/to/caseOutput.bed", format = "BED")

export(mat3CC$control, "~/path/to/controlOutput.bed", format = "BED")

Runs of homozygosity

One of the factors that affects the density of informative SNPs and therefore the resolution of recombination intervals is the degree of homozygosity in the sample. The function hzRun() is a tool to detect runs of homozygosity of a user-specified minimum length in Mb (minMb, default 1 Mb). To account for variation in SNP density, it also includes a criterion for the minimum number of SNPs per run (minSnps), with a default value of 5. Users can also provide a genetic map (mapFile) and specify a minimum centiMorgan length for runs (minCm). This example applies a sex-averaged map to all samples.

As the output is a GRanges or GRangesList object, as in xoDetect(), the procedure to produce genome browser visualizations is identical to that of the recombination visualizations corresponding to xoDetect().

sexavg_chr4 <- file.path(exampleDir, "sexavg_chr4.txt")
hzRun(simCEU, sexavg_chr4)
#> GRanges object with 1 range and 6 metadata columns:
#>       seqnames            ranges strand |    sampleId    startSnp   finishSnp
#>          <Rle>         <IRanges>  <Rle> | <character> <character> <character>
#>   [1]     chr4 78002267-79180440      * |        F4C3  rs17261150   rs7340831
#>         numSnps   startCm  finishCm
#>       <integer> <numeric> <numeric>
#>   [1]      1028   82.7108   83.7803
#>   -------
#>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

Chromosome-scale phasing

Inferring recombination implies identity by descent in between the informative SNPs, allowing for the phasing of this subset of SNPs in the pedigrees with three or more offspring. Many population-based phasing programs are highly accurate over short distances, but phase accuracy deteriorates rapidly at distances greater than a few centiMorgans. The function xoPhase() implements a novel phasing algorithm to produce long-range haplotype phase information at informative SNPs. Using the information in the nuclear family structures, it is possible to obtain chromosome-scale haplotypes at the informative subset of SNPs. In these data, between 14% and 36% of SNPs are informative, depending on the family.

The function xoPhase() uses the sets of maternal and paternal recombinations to infer haplotype phase at all informative SNPs for all members of each the nuclear families with three or more children.

SNPs that are not informative are still phased where the genotypes and surrounding haplotypes allow. Where both parents are homozygous, each child’s alleles follow directly. At a SNP where one or both parents are heterozygous, the child’s inheritance is inferred from the nearest flanking phased SNPs, which are identical by descent unless there is a recombination between them.
In these simulated data, 100% of SNPs can be phased. In real data, coverage will depend on missing data and inconsistent genotypes. There is an option to specify a subset of family IDs for phasing (famIds).

The output is a VCF object from VariantAnnotation (Obenchain et al. 2014), with one column per family member and phased genotypes in the GT field. For each child the first allele is the paternal and the second the maternal allele; for each parent the two alleles are the parent’s two phased haplotypes. Family and parent IDs are stored in colData().

phased <- xoPhase(simCEU, pat3, mat3)
phased
#> class: CollapsedVCF 
#> dim: 1162 28 
#> rowRanges(vcf):
#>   GRanges with 4 metadata columns: REF, ALT, QUAL, FILTER
#> info(vcf):
#>   DataFrame with 0 columns: 
#> geno(vcf):
#>   List of length 1: GT
#> geno(header(vcf)):
#>       Number Type   Description    
#>    GT 1      String Phased genotype

f6 <- colData(phased)$familyId == "F6"
geno(phased)$GT[1158:1162, f6]
#>            F6P1  F6P2  F6C1  F6C2  F6C3 
#> rs17002978 "0|0" "0|0" "0|0" "0|0" "0|0"
#> rs10032397 "0|0" "0|0" "0|0" "0|0" "0|0"
#> rs17420118 "0|0" "0|0" "0|0" "0|0" "0|0"
#> rs6838661  "0|1" "0|0" "0|0" "0|0" "1|0"
#> rs17002988 "0|0" "0|0" "0|0" "0|0" "0|0"

The phased genotypes can be written to a VCF file with writeVcf().

writeVcf(phased, "~/path/to/phased.vcf")

References

Session Information

The session information records the versions of all packages used in this vignette.

sessionInfo()
#> R version 4.6.2 (2026-10-29)
#> Platform: x86_64-pc-linux-gnu
#> Running under: Ubuntu 26.04.1 LTS
#> 
#> Matrix products: default
#> BLAS:   /usr/lib/x86_64-linux-gnu/openblas-pthread/libblas.so.3 
#> LAPACK: /usr/lib/x86_64-linux-gnu/openblas-pthread/libopenblasp-r0.3.32.so;  LAPACK version 3.12.0
#> 
#> locale:
#>  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
#>  [3] LC_TIME=en_US.UTF-8        LC_COLLATE=en_US.UTF-8    
#>  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
#>  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
#>  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
#> [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
#> 
#> time zone: Etc/UTC
#> tzcode source: system (glibc)
#> 
#> attached base packages:
#> [1] grid      stats4    stats     graphics  grDevices utils     datasets 
#> [8] methods   base     
#> 
#> other attached packages:
#>  [1] trackViewer_1.49.5          rtracklayer_1.73.0         
#>  [3] inferRecom_0.99.5           VariantAnnotation_1.59.4   
#>  [5] Rsamtools_2.29.0            Biostrings_2.81.9          
#>  [7] XVector_0.53.0              SummarizedExperiment_1.43.0
#>  [9] Biobase_2.73.2              GenomicRanges_1.65.4       
#> [11] IRanges_2.47.5              S4Vectors_0.51.10          
#> [13] Seqinfo_1.3.2               MatrixGenerics_1.25.0      
#> [15] matrixStats_1.5.0           BiocGenerics_0.59.13       
#> [17] generics_0.1.4              BiocStyle_2.41.0           
#> 
#> loaded via a namespace (and not attached):
#>  [1] DBI_1.3.0                bitops_1.1-0             httr2_1.3.0             
#>  [4] biomaRt_2.69.6           rlang_1.3.0              magrittr_2.0.5          
#>  [7] otel_0.3.0               compiler_4.6.2           RSQLite_3.53.3          
#> [10] GenomicFeatures_1.65.2   png_0.1-9                vctrs_0.7.3             
#> [13] txdbmaker_1.9.2          stringr_1.6.0            pkgconfig_2.0.3         
#> [16] crayon_1.5.3             fastmap_1.2.0            dbplyr_2.6.0            
#> [19] rmarkdown_2.32           UCSC.utils_1.9.1         strawr_0.0.92           
#> [22] bit_4.6.0                xfun_0.62                cachem_1.1.0            
#> [25] cigarillo_1.3.1          GenomeInfoDb_1.49.3      jsonlite_2.0.0          
#> [28] progress_1.2.3           blob_1.3.0               rhdf5filters_1.25.5     
#> [31] DelayedArray_0.39.8      Rhdf5lib_2.1.1           BiocParallel_1.47.0     
#> [34] parallel_4.6.2           prettyunits_1.2.0        R6_2.6.1                
#> [37] stringi_1.8.9            bslib_0.12.0             RColorBrewer_1.1-3      
#> [40] jquerylib_0.1.4          Rcpp_1.1.2               knitr_1.52              
#> [43] BiocBaseUtils_1.15.1     Matrix_1.7-6             splines_4.6.2           
#> [46] tidyselect_1.2.1         abind_1.4-8              yaml_2.3.12             
#> [49] codetools_0.2-20         curl_8.1.0               lattice_0.23-1          
#> [52] tibble_3.3.1             InteractionSet_1.41.0    KEGGREST_1.53.6         
#> [55] evaluate_1.0.5           survival_3.8-12          BiocFileCache_3.3.3     
#> [58] snpStats_1.63.0          pillar_1.11.1            BiocManager_1.30.27     
#> [61] filelock_1.0.3           RCurl_1.98-1.20          hms_1.1.4               
#> [64] scales_1.4.0             grImport_0.9-7           glue_1.8.1              
#> [67] maketools_1.3.2          tools_4.6.2              BiocIO_1.23.3           
#> [70] sys_3.4.3                BSgenome_1.81.1          GenomicAlignments_1.49.2
#> [73] buildtools_1.0.0         XML_3.99-0.25            rhdf5_2.57.20           
#> [76] AnnotationDbi_1.75.2     restfulr_0.0.17          cli_3.6.6               
#> [79] S4Arrays_1.13.3          dplyr_1.2.1              sass_0.5.0              
#> [82] digest_0.6.39            SparseArray_1.13.5       rjson_0.2.23            
#> [85] htmlwidgets_1.6.4        farver_2.1.2             memoise_2.0.1           
#> [88] htmltools_0.5.9          lifecycle_1.0.5          httr_1.4.9              
#> [91] bit64_4.8.6
Bhérer, Claude, Christopher L Campbell, and Adam Auton. 2017. “Refined Genetic Maps Reveal Sexual Dimorphism in Human Meiotic Recombination at Multiple Scales.” Nature Communications 8: 14994. https://doi.org/10.1038/ncomms14994.
Chowdhury, Reshmi, Philippe RJ Bois, Eleanor Feingold, Stephanie L Sherman, and Vivian G Cheung. 2009. “Genetic Analysis of Variation in Human Meiotic Recombination.” PLoS Genetics 5 (9): e1000648.
Clayton, David. 2026. snpStats: SnpMatrix and XSnpMatrix Classes and Methods. https://doi.org/10.18129/B9.bioc.snpStats.
Dimitromanolakis, Apostolos, Jingxiong Xu, Agnieszka Krol, and Laurent Briollais. 2019. “sim1000G: A User-Friendly Genetic Variant Simulator in r for Unrelated Individuals and Family-Based Designs.” BMC Bioinformatics 20 (1): 26.
International HapMap 3 Consortium. 2010. “Integrating Common and Rare Genetic Variation in Diverse Human Populations.” Nature 467 (7311): 52–58. https://doi.org/10.1038/nature09298.
Lawrence, Michael, Robert Gentleman, and Vincent Carey. 2009. “Rtracklayer: An r Package for Interfacing with Genome Browsers.” Bioinformatics 25 (14): 1841–42. https://doi.org/10.1093/bioinformatics/btp328.
Lawrence, Michael, Wolfgang Huber, Hervé Pagès, et al. 2013. “Software for Computing and Annotating Genomic Ranges.” PLoS Computational Biology 9 (8): e1003118. https://doi.org/10.1371/journal.pcbi.1003118.
Obenchain, Valerie, Michael Lawrence, Vincent Carey, Stephanie Gogarten, Paul Shannon, and Martin Morgan. 2014. “VariantAnnotation: A Bioconductor Package for Exploration and Annotation of Genetic Variants.” Bioinformatics 30 (14): 2076–78. https://doi.org/10.1093/bioinformatics/btu168.
Ou, Jianhong, and Lihua Julie Zhu. 2019. “trackViewer: A Bioconductor Package for Interactive and Integrative Visualization of Multi-Omics Data.” Nature Methods 16: 453–54. https://doi.org/10.1038/s41592-019-0430-y.