CAGEr: an R package for CAGE (Cap Analysis of Gene Expression) data analysis and promoterome mining
Introduction
This document describes how to use CAGEr CAGEr, a Bioconductor package designed to process, analyse and visualise Cap Analysis of Gene Expression (CAGE) sequencing data. CAGE (Kodzius et al. 2006) is a high-throughput method for transcriptome analysis that utilizes cap trapping (P. Carninci et al. 1996), a technique based on the biotinylation of the 7-methylguanosine cap of Pol II transcripts, to pulldown the 5′-complete cDNAs reversely transcribed from the captured transcripts. A linker sequence is ligated to the 5′ end of the cDNA and a specific restriction enzyme is used to cleave off a short fragment from the 5′ end. Resulting fragments are then amplified and sequenced using massive parallel high-throughput sequencing technology, which results in a large number of short sequenced tags that can be mapped back to the referent genome to infer the exact position of the transcription start sites (TSSs) used for transcription of captured RNAs (Figure @ref(fig:CAGEprotocol)). The number of CAGE tags supporting each TSS gives the information on the relative frequency of its usage and can be used as a measure of expression from that specific TSS. Thus, CAGE provides information on two aspects of capped transcriptome: genome-wide 1bp-resolution map of TSSs and transcript expression levels. This information can be used for various analyses, from 5′ centered expression profiling (Takahashi et al. 2012) to studying promoter architecture (Piero Carninci et al. 2006).
Overview of CAGE experiment
CAGE samples derived from various organisms (genomes) can be analysed by CAGEr and the only limitation is the availability of the referent genome as a BSgenome package in case when raw mapped CAGE tags are processed. CAGEr provides a comprehensive workflow that starts from mapped CAGE tags and includes reconstruction of TSSs and promoters and their visualisation, as well as more specialized downstream analyses like promoter width, expression profiling and differential TSS usage. It can use both Binary Sequence Alignment Map (BAM) files of aligned CAGE tags or files with genomic locations of TSSs and number of supporting CAGE tags as input. If BAM files are provided CAGEr constructs TSSs from aligned CAGE tags and counts the number of tags supporting each TSS, while allowing filtering out low-quality tags and removing technology-specific bias. It further performs normalization of raw CAGE tag count, clustering of TSSs into tag clusters (TC) and their aggregation across multiple CAGE experiments into promoters to construct the promoterome. Various methods for normalization and clustering of TSSs are supported. Exporting data into different types of track objects allows export and various visualisations of TSSs and clusters (promoters) in the UCSC Genome Browser, which facilitate generation of hypotheses. CAGEr manipulates multiple CAGE experiments at once and performs analyses across datasets, including expression profiling and detection of differential TSS usage (promoter shifting). Multicore option for parallel processing is supported on Unix-like platforms, which significantly reduces computing time.
Here are some of the functionalities provided in this package:
Reading in multiple CAGE datasets from various sources; user provided BAM or TSS input files, public CAGE datasets from accompanying data package.
Correcting systematic G nucleotide addition bias at the 5′ end of CAGE tags.
Plotting pairwise scatter plots, calculating correlation between datasets and merging datasets.
Normalizing raw CAGE tag count: simple tag per million (tpm) or power-law based normalization (Balwierz et al. 2009).
Clustering individual TSSs into tag clusters (TCs) and aggregating clusters across multiple CAGE datasets to create a set of consensus promoters.
Making bedGraph or BED files of individual TSSs or clusters for visualisation in the genome browser.
Expression clustering of individual TSSs or consensus promoters into distinct expression profiles using common clustering algorithms.
Calculating promoter width based on the cumulative distribution of CAGE signal along the promoter.
Scoring and statistically testing differential TSS usage (promoter shifting) and detecting promoters that shift between two samples.
Several data packages are accompanying CAGEr package. They contain majority of the up-to-date publicly available CAGE data produced by major consortia including FANTOM and ENCODE. These include FANTOM3and4CAGE package available from Bioconductor, as well as ENCODEprojectCAGE and ZebrafishDevelopmentalCAGE packages available from http://promshift.genereg.net/CAGEr/. In addition, direct fetching of TSS data from FANTOM5 web resource (the largest collection of TSS data for human and mouse) from within CAGEr is also available. These are all valuable resources of genome-wide TSSs in various tissue/cell types for various model organisms that can be used directly in R. A separate vignette describes how these public datasets can be included into a workflow provided by CAGEr. For further information on the content of the data packages and the list of available CAGE datasets please refer to the vignette of the corresponding data package.
For further details on the implemented methods and for citing the CAGEr package in your work please refer to (Haberle et al. 2015).
Input data for CAGEr
CAGEr package supports three types of CAGE data input:
Sequenced CAGE tags mapped to the genome: either BAM (Binary Sequence Alignment Map) files of sequenced CAGE tags aligned to the referent genome (including the paired-end data such as CAGEscan) or BED files of CAGE tags (fragments).
CAGE detected TSSs (CTSSs): tab separated files with genomic coordinates of TSSs and number of tags supporting each TSS. The file should not contain a header and the data must be organized in four columns:
- name of the chromosome: names must match the names of chromosomes in the corresponding BSgenome package.
- 1-based coordinate of the TSS on the chromosome
- genomic strand: should be either + or -
- number of CAGE tags supporting that TSS
Publicly available CAGE datasets from R data package: Several data packages containing CAGE data for various organisms produced by major consortia are accompanying this package. Selected subset of these data can be used as input for .
The type and the format of the input files is specified at the
beginning of the workflow, when the CAGEset object is
created (section 3.2). This is done by setting the
inputFilesType argument, which accepts the following
self-explanatory options referring to formats mentioned above:
"bam", "bamPairedEnd", "bed", "ctss", "CTSStable".
In addition, the package provides a method for coercing a
data.frame object containing single base-pair TSS
information into a CAGEset object (as described in section
4.1), which can be further used in the workflow described below.
The CAGEr workflow
Getting started
We start the workflow by creating a CAGEexp object, which is a container for storing CAGE datasets and all the results that will be generated by applying specific functions. The CAGEexp objects are an extension of the MultiAssayExperiment class, and therefore can use all their methods. The expression data is stored in CAGEexp using SummarizedExperiment objects, and can also access their methods.
To load the CAGEr package and the other libraries into your R environment type:
Creating a CAGEexp object
Specifying a genome assembly
In this tutorial we will be using data from zebrafish Danio
rerio that was mapped to the danRer7 assembly of the
genome. Therefore, the corresponding genome package BSgenome.Drerio.UCSC.danRer7
has to be installed. It will be automatically loaded by CAGEr
commands when needed.
In case the data is mapped to a genome that is not readily available
through BSgenome package (not in the list returned by
BSgenome::available.genomes() function), a custom
BSgenome package can be build and installed first. (See the
vignette within the BSgenome package for instructions on how to
build a custom genome package). The genomeName argument can
then be set to the name of the build genome package when creating a
CAGEexp object (see the section Creating
CAGEexp object below). It can also be set to
NULL as a last resort when no BSgenome package is
available.
The BSgenome package is required by the CAGEr
functions that need access to the genome sequence, for instance for
G-correction. It is also used provide seqinfo
information to the various Bioconductor objects produced by
CAGEr. For this reason, CAGEr will discard alignments
that are not on chromosomes named in the BSgenome package. If
this is not desirable, set genomeName to
NULL.
Specifying input files
The subset of zebrafish (Danio rerio) developmental time-series CAGE data generated by (Nepal et al. 2013) will be used in the following demonstration of the CAGEr workflow.
Files with genomic coordinates of TSSs detected by CAGE in 4
zebrafish developmental stages are included in this package in the
extdata subdirectory. The files contain TSSs from a part of
chromosome 17 (26,000,000-46,000,000), and there are two files for one
of the developmental stages (two independent replicas). The data in
files is organized in four tab-separated columns as described above in
section @ref(input-formats).
Creating the object
The CAGEexp object is crated with the CAGEexp
constructor, that requires information on file path and type, sample
names and reference genome name.
ce <- CAGEexp( genomeName = "BSgenome.Drerio.UCSC.danRer7"
, inputFiles = inputFiles
, inputFilesType = "ctss"
, sampleLabels = sub( ".chr17.ctss", "", basename(inputFiles))
)To display the created object type:
## A CAGEexp object of 0 listed
## experiments with no user-defined names and respective classes.
## Containing an ExperimentList class object of length 0:
## Functionality:
## experiments() - obtain the ExperimentList instance
## colData() - the primary/phenotype DataFrame
## sampleMap() - the sample coordination DataFrame
## `$`, `[`, `[[` - extract colData columns, subset, or experiment
## *Format() - convert into a long or wide DataFrame
## assays() - convert ExperimentList to a SimpleList of matrices
## exportClass() - save data to flat filesThe supplied information can be seen with the colData
accessor, whereas all other slots are still empty, since no data has
been read yet and no analysis conducted.
## DataFrame with 5 rows and 3 columns
## inputFiles inputFilesType sampleLabels
## <character> <character> <character>
## Zf.30p.dome /tmp/Rtmp2O3rfT/Rins.. ctss Zf.30p.dome
## Zf.high /tmp/Rtmp2O3rfT/Rins.. ctss Zf.high
## Zf.prim6.rep1 /tmp/Rtmp2O3rfT/Rins.. ctss Zf.prim6.rep1
## Zf.prim6.rep2 /tmp/Rtmp2O3rfT/Rins.. ctss Zf.prim6.rep2
## Zf.unfertilized.egg /tmp/Rtmp2O3rfT/Rins.. ctss Zf.unfertilized.eggReading in the data
In case when the CAGE / TSS data is to be read from input files, an
empty CAGEexp object with information about the files is first
created as described above in section @ref(create-CAGEexp). To actually
read in the data into the object we use getCTSS() function,
that will add an experiment called tagCountMatrix to the
CAGEexp object.
## A CAGEexp object of 1 listed
## experiment with a user-defined name and respective class.
## Containing an ExperimentList class object of length 1:
## [1] tagCountMatrix: RangedSummarizedExperiment with 23343 rows and 5 columns
## Functionality:
## experiments() - obtain the ExperimentList instance
## colData() - the primary/phenotype DataFrame
## sampleMap() - the sample coordination DataFrame
## `$`, `[`, `[[` - extract colData columns, subset, or experiment
## *Format() - convert into a long or wide DataFrame
## assays() - convert ExperimentList to a SimpleList of matrices
## exportClass() - save data to flat filesThis function reads the provided files in the order they were
specified in the inputFiles argument. It creates a single
set of all TSSs detected across all input datasets (union of TSSs) and a
table with counts of CAGE tags supporting each TSS in every dataset.
(Note that in case when a CAGEr object is created by coercion
from an existing expression table there is no need to call
getCTSS()).
Genomic coordinates of all TSSs and numbers of supporting CAGE tags
in every input sample can be retrieved using the
CTSStagCountSE() function. CTSScoordinatesGR()
accesses the CTSS coordinates and CTSStagCountDF() accesses
the CTSS expression values.1
## class: RangedSummarizedExperiment
## dim: 23343 5
## metadata(0):
## assays(1): counts
## rownames: NULL
## rowData names(0):
## colnames(5): Zf.30p.dome Zf.high Zf.prim6.rep1 Zf.prim6.rep2
## Zf.unfertilized.egg
## colData names(0):## CTSS object with 23343 positions and 0 metadata columns:
## seqnames pos strand
## <Rle> <integer> <Rle>
## [1] chr17 26027430 +
## [2] chr17 26050540 +
## [3] chr17 26118088 +
## [4] chr17 26142853 +
## [5] chr17 26166954 +
## ... ... ... ...
## [23339] chr17 45975041 -
## [23340] chr17 45975540 -
## [23341] chr17 45975544 -
## [23342] chr17 45982697 -
## [23343] chr17 45999921 -
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genome
## BSgenome name: BSgenome.Drerio.UCSC.danRer7## DataFrame with 23343 rows and 5 columns
## Zf.30p.dome Zf.high Zf.prim6.rep1 Zf.prim6.rep2 Zf.unfertilized.egg
## <Rle> <Rle> <Rle> <Rle> <Rle>
## 1 0 0 1 0 0
## 2 0 0 0 0 1
## 3 0 0 1 0 0
## 4 0 0 0 1 0
## 5 0 0 1 0 0
## ... ... ... ... ... ...
## 23339 1 0 0 0 0
## 23340 0 2 0 0 0
## 23341 0 1 0 0 0
## 23342 0 0 1 0 0
## 23343 1 0 0 0 0## CTSS object with 7277 positions and 1 metadata column:
## seqnames pos strand | score
## <Rle> <integer> <Rle> | <Rle>
## [1] chr17 26222417 + | 1
## [2] chr17 26323229 + | 1
## [3] chr17 26453603 + | 2
## [4] chr17 26453615 + | 1
## [5] chr17 26453632 + | 3
## ... ... ... ... . ...
## [7273] chr17 45901810 - | 1
## [7274] chr17 45901814 - | 1
## [7275] chr17 45901816 - | 1
## [7276] chr17 45975041 - | 1
## [7277] chr17 45999921 - | 1
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genome
## BSgenome name: BSgenome.Drerio.UCSC.danRer7Note that the samples are ordered in the way they were supplied when creating the CAGEexp object and will be presented in that order in all the results and plots. To check sample labels and their ordering type:
## #FF0000 #CCFF00 #00FF66
## "Zf.30p.dome" "Zf.high" "Zf.prim6.rep1"
## #0066FF #CC00FF
## "Zf.prim6.rep2" "Zf.unfertilized.egg"In addition, a colour is assigned to each sample, which is
consistently used to depict that sample in all the plots. By default a
rainbow palette of colours is used and the hexadecimal format of the
assigned colours can be seen as names attribute of sample labels shown
above. The colours can be changed to taste at any point in the workflow
using the setColors() function.
Quality controls and preliminary analyses
Genome annotations
By design, CAGE tags map transcription start sites and therefore detect promoters. Quantitatively, the proportion of tags that map to promoter regions will depend both on the quality of the libraries and the quality of the genome annotation, which may be incomplete. Nevertheless, strong variations between libraries prepared in the same experiment may be used for quality controls.
CAGEr can intersect CTSSes with reference transcript models
and annotate them with the name(s) of the models, and the region
categories promoter, exon, intron and
unknown, by using the annotateCTSS function. The
reference models can be GENCODE loaded with the import.gff
function of the rtracklayer
package, or any other input that has the same structure, see
help("annotateCTSS") for details. In this example, we will
use a sample annotation for zebrafish (see
help("exampleZv9_annot")).
The annotation results are stored as tag counts in the sample metadata, and as new columns in the CTSS genomic ranges
## DataFrame with 5 rows and 5 columns
## librarySizes promoter exon intron unknown
## <integer> <integer> <integer> <integer> <integer>
## Zf.30p.dome 41814 37843 2352 594 1025
## Zf.high 45910 41671 2848 419 972
## Zf.prim6.rep1 34053 29531 2714 937 871
## Zf.prim6.rep2 34947 30799 2320 834 994
## Zf.unfertilized.egg 56140 51114 2860 400 1766## CTSS object with 23343 positions and 2 metadata columns:
## seqnames pos strand | genes annotation
## <Rle> <integer> <Rle> | <Rle> <Rle>
## [1] chr17 26027430 + | unknown
## [2] chr17 26050540 + | grid1a promoter
## [3] chr17 26118088 + | grid1a exon
## [4] chr17 26142853 + | grid1a intron
## [5] chr17 26166954 + | grid1a exon
## ... ... ... ... . ... ...
## [23339] chr17 45975041 - | unknown
## [23340] chr17 45975540 - | unknown
## [23341] chr17 45975544 - | unknown
## [23342] chr17 45982697 - | unknown
## [23343] chr17 45999921 - | unknown
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genome
## BSgenome name: BSgenome.Drerio.UCSC.danRer7A function plotAnnot is provided to plot the annotations
as stacked bar plots. Here, all the CAGE libraries look very
promoter-specific.
## Warning: Removed 20 rows containing missing values or values outside the scale range
## (`geom_segment()`).## Warning: Removed 20 rows containing missing values or values outside the scale range
## (`geom_point()`).
Correlation between samples
As part of the basic sanity checks, we can explore the data by
looking at the correlation between the samples. The
plotCorrelation2() function will plot pairwise scatter
plots of expression scores per TSS or consensus cluster and calculate
correlation coefficients between all possible pairs of samples2. A
threshold can be set, so that only regions with an expression score (raw
or normalized) above the threshold (either in one or both samples) are
considered when calculating correlation. Three different correlation
measures are supported: Pearson’s, Spearman’s and Kendall’s correlation
coefficients. Note that while the scatterplots are on a logarithmic
scale with pseudocount added to the zero values, the correlation
coefficients are calculated on untransformed (but thresholded) data.
corr.m <- plotCorrelation2( ce, samples = "all"
, tagCountThreshold = 1, applyThresholdBoth = FALSE
, method = "pearson")
Correlation of raw CAGE tag counts per TSS
Sequence distribution at the transcription start site.
The presence of the core promoter motifs can be checked with the
TSSlogo() function, provided that the CAGEexp
object was built with a BSgenome package allowing access to the
sequence flanking the transcription start sites.
## Warning: The `<scale>` argument of `guides()` cannot be `FALSE`. Use "none" instead as
## of ggplot2 3.3.4.
## ℹ The deprecated feature was likely used in the ggseqlogo package.
## Please report the issue at <https://github.com/omarwagih/ggseqlogo/issues>.
## This warning is displayed once every 8 hours.
## Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
## generated.
Sequence logo at the transcription start site
The TSSlogo() function can also be used later. When
passed tag clusters or consensus clusters, it will
automatically center the regions on their dominant peak.
Merging of replicates
Based on calculated correlation we might want to merge and/or
rearrange some of the datasets. To rearrange the samples in the temporal
order of the zebrafish development (unfertilized egg -> high -> 30
percent dome -> prim6) and to merge the two replicas for the prim6
developmental stage we use the mergeSamples() function:
ce <- mergeSamples(ce, mergeIndex = c(3,2,4,4,1),
mergedSampleLabels = c("Zf.unfertilized.egg", "Zf.high", "Zf.30p.dome", "Zf.prim6"))
ce <- annotateCTSS(ce, exampleZv9_annot)The mergeIndex argument controls which samples will be
merged and how the final dataset will be ordered. Samples labeled by the
same number (in our case samples three and four) will be merged together
by summing number of CAGE tags per TSS. The final set of samples will be
ordered in the ascending order of values provided in
mergeIndex and will be labeled by the labels provided in
the mergedSampleLabels argument. Note that
mergeSamples function resets all slots with results of
downstream analyses, so in case there were any results in the
CAGEexp object prior to merging, they will be removed. Thus,
annotation has to be redone.
Normalization
Library sizes (number of total sequenced tags) of individual
experiments differ, thus normalization is required to make them
comparable. The librarySizes function returns the total
number of CAGE tags in each sample:
## [1] 56140 45910 41814 69000The CAGEr package supports both simple tags per million normalization and power-law based normalization. It has been shown that many CAGE datasets follow a power-law distribution (Balwierz et al. 2009). Plotting the number of CAGE tags (X-axis) against the number of TSSs that are supported by <= of that number of tags (Y-axis) results in a distribution that can be approximated by a power-law. On a log-log scale this reverse cumulative distribution will manifest as a monotonically decreasing linear function, which can be defined as
y = −1 * α * x + β
and is fully determined by the slope α and total number of tags T (which together with α determines the value of β).
To check whether our CAGE datasets follow power-law distribution and
in which range of values, we can use the
plotReverseCumulatives function:
Reverse cumulative distribution of CAGE tags
In addition to the reverse cumulative plots (Figure @ref(fig:ReverseCumulatives)), a power-law distribution will be fitted to each reverse cumulative using values in the specified range (denoted with dashed lines in Figure @ref(fig:ReverseCumulatives)) and the value of α will be reported for each sample (shown in the brackets in the Figure @ref(fig:ReverseCumulatives) legend). The plots can help in choosing the optimal parameters for power-law based normalization. We can see that the reverse cumulative distributions look similar and follow the power-law in the central part of the CAGE tag counts values with a slope between -1.1 and -1.3. Thus, we choose a range from 5 to 1000 tags to fit a power-law, and we normalize all samples to a referent power-law distribution with a total of 50,000 tags and slope of -1.2 (α = 1.2).3
To perform normalization we pass these parameters to the
normalizeTagCount function.
## Warning in dim(assays): The dim() method for DataFrameList objects is deprecated. Please use
## dims() on these objects instead.## Warning in nrow(x): The nrow() method for DataFrameList objects is deprecated. Please use
## nrows() on these objects instead.## Warning in ncol(x): The ncol() method for DataFrameList objects is deprecated. Please use
## ncols() on these objects instead.## Warning in dim(assays): The dim() method for DataFrameList objects is deprecated. Please use
## dims() on these objects instead.## Warning in nrow(x): The nrow() method for DataFrameList objects is deprecated. Please use
## nrows() on these objects instead.## Warning in ncol(x): The ncol() method for DataFrameList objects is deprecated. Please use
## ncols() on these objects instead.## class: RangedSummarizedExperiment
## dim: 23343 4
## metadata(0):
## assays(2): counts normalizedTpmMatrix
## rownames: NULL
## rowData names(2): genes annotation
## colnames(4): Zf.unfertilized.egg Zf.high Zf.30p.dome Zf.prim6
## colData names(0):The normalization is performed as described in (Balwierz et al. 2009):
- Power-law is fitted to the reverse cumulative distribution in the specified range of CAGE tags values to each sample separately.
- A referent power-law distribution is defined based on the provided
alpha(slope in the log-log representation) andT(total number of tags) parameters. SettingTto 1 million results in normalized tags per million (tpm) values. - Every sample is normalized to the defined referent distribution, i.e. given the parameters that approximate its own power-law distribution it is calculated how many tags would each TSS have in the referent power-law distribution.
In addition to the two provided normalization methods, a pass-through
option none can be set as method parameter to
keep using raw tag counts in all downstream steps. Note that
normalizeTagCount() has to be applied to CAGEr
object before moving to next steps. Thus, in order to keep using raw tag
counts run the function with method="none". In that case,
all results and parameters in the further steps that would normally
refer to normalized CAGE signal (denoted as tpm), will actually be raw
tag counts.
CTSS flagging
Some CTSSes have a low expression score, and are found in only a few
libraries. In non-PCR-amplified CAGE libraries, a CTSS found in a single
library with an expression score of 1 tag represents the detection of a
single mRNA molecule’s 5-prime end. But it could also represent the
mismapping one molecule because of a sequencing error. To flag CTSSes
that have poor reproducibility support so that other steps of the
analysis can ignore them, the filterLowExpCTSS function is
provided. It will add an internal flag in the
filteredCTSSidx column of the CTSS objects,
set to FALSE where expression is lower than a given
threshold in a given number of samples. This flag is later used by CTSS
clustering and export functions.
Let’s flag low-fidelity TSSs supported by less than 1 normalized tag counts in all of the samples.
ce <- filterLowExpCTSS(ce, thresholdIsTpm = TRUE, nrPassThreshold = 1, threshold = 1)
CTSSnormalizedTpmGR(ce,1)## CTSS object with 8395 positions and 4 metadata columns:
## seqnames pos strand | genes annotation filteredCTSSidx
## <Rle> <integer> <Rle> | <Rle> <Rle> <Rle>
## [1] chr17 26050540 + | grid1a promoter FALSE
## [2] chr17 26391265 + | si:ch73-34j14.2 exon FALSE
## [3] chr17 26446219 + | unknown FALSE
## [4] chr17 26453605 + | promoter TRUE
## [5] chr17 26453632 + | promoter TRUE
## ... ... ... ... . ... ... ...
## [8391] chr17 45901781 - | arf6b promoter FALSE
## [8392] chr17 45901784 - | arf6b promoter TRUE
## [8393] chr17 45901800 - | arf6b promoter FALSE
## [8394] chr17 45901814 - | arf6b promoter TRUE
## [8395] chr17 45901816 - | arf6b promoter TRUE
## score
## <Rle>
## [1] 0.658379223965292
## [2] 0.658379223965292
## [3] 0.658379223965292
## [4] 1.30374775871268
## [5] 1.30374775871268
## ... ...
## [8391] 0.658379223965292
## [8392] 0.658379223965292
## [8393] 0.658379223965292
## [8394] 1.30374775871268
## [8395] 1.94429500559247
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genome
## BSgenome name: BSgenome.Drerio.UCSC.danRer7CTSS clustering
Transcription start sites are found in the promoter region of a gene and reflect the transcriptional activity of that promoter (Figure @ref(fig:CTSSbedGraph)). TSSs in the close proximity of each other give rise to a functionally equivalent set of transcripts and are likely regulated by the same promoter elements. Thus, TSSs can be spatially clustered into larger transcriptional units, called tag clusters (TCs) that correspond to individual promoters. CAGEr supports two methods for sample-specific spatial clustering of TSSs along the genome:
distclu(): simple distance-based clustering in which two neighbouring TSSs are joined together if they are closer than some specified distance (greedy algorithm);paraclu(): parametric clustering of data attached to sequences based on the density of the signal (Frith et al. 2007), http://www.cbrc.jp/paraclu/;
We will perform a simple distance-based clustering using 20 bp as a maximal allowed distance between two neighbouring TSSs.
Our final set of tag clusters will not include singletons (clusters
with only one TSS), unless the normalized signal is above 5, it is a
reasonably supported TSS. The CTSS clustering functions function creates
a set of clusters for each sample separately; for each cluster it
returns the genomic coordinates, counts the number of TSSs within the
cluster, determines the (1-based) position of the most frequently used
(dominant) TSS, calculates the total CAGE signal within the cluster and
CAGE signal supporting the dominant TSS only. We can extract tag
clusters for a desired sample from CAGEexp object by
calling the tagClustersGR function:
## TagClusters object with 517 ranges and 3 metadata columns:
## seqnames ranges strand | score dominant_ctss
## <Rle> <IRanges> <Rle> | <Rle> <CTSS>
## 1 chr17 26453632-26453708 + | 26.9709371501973 chr17:26453667:+
## 2 chr17 26564508-26564610 + | 128.637202208017 chr17:26564585:+
## 3 chr17 26595637-26595793 + | 216.999442534332 chr17:26595750:+
## 4 chr17 26596033-26596091 + | 10.4200035230487 chr17:26596070:+
## 5 chr17 26596118-26596127 + | 12.1994648486481 chr17:26596118:+
## ... ... ... ... . ... ...
## 513 chr17 45700182-45700187 - | 9.6182003317169 chr17:45700182:-
## 514 chr17 45901329-45901330 - | 1.96212698267798 chr17:45901329:-
## 515 chr17 45901698-45901710 - | 27.6544648890639 chr17:45901698:-
## 516 chr17 45901732-45901784 - | 119.96944736195 chr17:45901749:-
## 517 chr17 45901814-45901816 - | 3.24804276430516 chr17:45901816:-
## nr_ctss
## <integer>
## 1 12
## 2 24
## 3 35
## 4 9
## 5 4
## ... ...
## 513 3
## 514 2
## 515 4
## 516 15
## 517 2
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genomePromoter width
Genome-wide mapping of TSSs using CAGE has initially revealed two major classes of promoters in mammals (Piero Carninci et al. 2006), with respect to the number and distribution of TSSs within the promoter. They have been further correlated with differences in the underlying sequence and the functional classes of the genes they regulate, as well as the organization of the chromatin around them.
- “broad” promoters with multiple TSSs characterized by a high GC content and overlap with a CpG island, which are associated with widely expressed or developmentally regulated genes;
- “sharp” promoters with one dominant TSS often associated with a TATA-box at a fixed upstream distance, which often regulate tissue-specific transcription.
Thus, the width of the promoter is an important characteristic that
distinguishes different functional classes of promoters. CAGEr
analyzes promoter width across all samples present in the
CAGEexp object. It defines promoter width by taking into
account both the positions and the CAGE signal at TSSs along the tag
cluster, thus making it more robust with respect to total expression and
local level of noise at the promoter. Width of every tag cluster is
calculated as following:
- Cumulative distribution of CAGE signal along the cluster is calculated.
- A “lower” (
qLow) and an “upper” (qUp) quantile are selected by the user. - From the 5′ end the position, the position of a quantile q is determined as the first base in which of the cumulative expression is higher or equal to q% of the total CAGE signal of that cluster.
- Promoter interquantile width is defined as the distance (in base pairs) between the two quantile positions.
The procedure is schematically shown in Figure @ref(fig:CumulativeDistribution).
Cumulative distribution of CAGE signal and definition of interquantile width
Required computations are done using
cumulativeCTSSdistribution and
quantilePositions functions, which calculate cumulative
distribution for every tag cluster in each of the samples and determine
the positions of selected quantiles, respectively:
ce <- cumulativeCTSSdistribution(ce, clusters = "tagClusters", useMulticore = T)
ce <- quantilePositions(ce, clusters = "tagClusters", qLow = 0.1, qUp = 0.9)Tag clusters and their interquantile width can be retrieved by
calling tagClusters function:
## TagClusters object with 517 ranges and 6 metadata columns:
## seqnames ranges strand | score dominant_ctss
## <Rle> <IRanges> <Rle> | <Rle> <CTSS>
## 1 chr17 26453632-26453708 + | 26.9709371501973 chr17:26453667:+
## 2 chr17 26564508-26564610 + | 128.637202208017 chr17:26564585:+
## 3 chr17 26595637-26595793 + | 216.999442534332 chr17:26595750:+
## 4 chr17 26596033-26596091 + | 10.4200035230487 chr17:26596070:+
## 5 chr17 26596118-26596127 + | 12.1994648486481 chr17:26596118:+
## ... ... ... ... . ... ...
## 513 chr17 45700182-45700187 - | 9.6182003317169 chr17:45700182:-
## 514 chr17 45901329-45901330 - | 1.96212698267798 chr17:45901329:-
## 515 chr17 45901698-45901710 - | 27.6544648890639 chr17:45901698:-
## 516 chr17 45901732-45901784 - | 119.96944736195 chr17:45901749:-
## 517 chr17 45901814-45901816 - | 3.24804276430516 chr17:45901816:-
## nr_ctss q_0.1 q_0.9 interquantile_width
## <integer> <Rle> <Rle> <Rle>
## 1 12 36 72 37
## 2 24 17 81 65
## 3 35 37 114 78
## 4 9 1 50 50
## 5 4 1 10 10
## ... ... ... ... ...
## 513 3 1 6 6
## 514 2 1 2 2
## 515 4 1 2 2
## 516 15 2 21 20
## 517 2 1 3 3
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genomeOnce the cumulative distributions and the positions of quantiles have been calculated, the histograms of interquantile width can be plotted to globally compare the promoter width across different samples (Figure @ref(fig:TagClustersInterquantileWidth):
Significant difference in the promoter width might indicate global differences in the modes of gene regulation between the two samples. The histograms can also help in choosing an appropriate width threshold for separating sharp and broad promoters.
Creating consensus promoters across samples
Tag clusters are created for each sample individually and they are
often sample-specific, thus can be present in one sample but absent in
another. In addition, in many cases tag clusters do not coincide
perfectly within the same promoter region, or there might be two
clusters in one sample and only one larger in the other. To be able to
compare genome-wide transcriptional activity across samples and to
perform expression profiling, a single set of consensus clusters needs
to be created. This is done using the aggregateTagClusters
function, which aggregates tag clusters from all samples into a single
set of non-overlapping consensus clusters:
ce <- aggregateTagClusters(ce, tpmThreshold = 5, qLow = 0.1, qUp = 0.9, maxDist = 100)
ce$outOfClusters / ce$librarySizes *100## Zf.unfertilized.egg Zf.high Zf.30p.dome Zf.prim6
## 23.0 23.3 23.9 26.6Tag clusters can be aggregated using their full span (from start to
end) or using positions of previously calculated quantiles as their
boundaries. Only tag clusters above given tag count threshold will be
considered and two clusters will be aggregated together if their
boundaries (i.e. either starts and ends or positions of quantiles) are
<= maxDist apart. Final set of consensus clusters can be
retrieved by:
## ConsensusClusters object with 285 ranges and 3 metadata columns:
## seqnames ranges strand |
## <Rle> <IRanges> <Rle> |
## chr17:26453647-26453719:+ chr17 26453647-26453719 + |
## chr17:26564524-26564591:+ chr17 26564524-26564591 + |
## chr17:26595673-26595750:+ chr17 26595673-26595750 + |
## chr17:26596033-26596339:+ chr17 26596033-26596339 + |
## chr17:26645157-26645514:+ chr17 26645157-26645514 + |
## ... ... ... ... .
## chr17:45534727-45534729:- chr17 45534727-45534729 - |
## chr17:45545922-45545996:- chr17 45545922-45545996 - |
## chr17:45554314-45554345:- chr17 45554314-45554345 - |
## chr17:45700092-45700187:- chr17 45700092-45700187 - |
## chr17:45901695-45901752:- chr17 45901695-45901752 - |
## score dominant_ctss nr_ctss
## <Rle> <CTSS> <integer>
## chr17:26453647-26453719:+ 174.694216150624 chr17:26453701:+ 22
## chr17:26564524-26564591:+ 308.691093930438 chr17:26564585:+ 27
## chr17:26595673-26595750:+ 891.067717359326 chr17:26595750:+ 34
## chr17:26596033-26596339:+ 321.610459357018 chr17:26596198:+ 57
## chr17:26645157-26645514:+ 2818.40482968203 chr17:26645160:+ 92
## ... ... ... ...
## chr17:45534727-45534729:- 176.502992017265 chr17:45534727:- 3
## chr17:45545922-45545996:- 919.561599189012 chr17:45545991:- 32
## chr17:45554314-45554345:- 44.0059397386966 chr17:45554339:- 6
## chr17:45700092-45700187:- 39.736785544872 chr17:45700182:- 8
## chr17:45901695-45901752:- 846.564852543873 chr17:45901749:- 22
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genomewhich will return genomic coordinates and sum of CAGE signal across
all samples for each consensus cluster (the tpm
column).
Analogously to tag clusters, analysis of promoter width can be
performed for consensus clusters as well, using the same
cumulativeCTSSdistribution, quantilePositions
and plotInterquantileWidth functions as described above,
but by setting the clusters parameter to
"consensusClusters". Like the CTSS, the consensus clusters
can also be annotated:
ce <- annotateConsensusClusters(ce, exampleZv9_annot)
ce <- cumulativeCTSSdistribution(ce, clusters = "consensusClusters", useMulticore = TRUE)
ce <- quantilePositions(ce, clusters = "consensusClusters", qLow = 0.1, qUp = 0.9, useMulticore = TRUE)Although consensus clusters are created to represent consensus across all samples, they obviously have different CAGE signal and can have different width or position of the dominant TSS in the different samples. Sample-specific information on consensus clusters can be retrieved with the function, by specifying desired sample name (analogous to retrieving tag clusters):
## ConsensusClusters object with 285 ranges and 9 metadata columns:
## seqnames ranges strand | score
## <Rle> <IRanges> <Rle> | <numeric>
## chr17:26453647-26453719:+ chr17 26453647-26453719 + | 19.1354
## chr17:26564524-26564591:+ chr17 26564524-26564591 + | 96.9145
## chr17:26595673-26595750:+ chr17 26595673-26595750 + | 177.6584
## chr17:26596033-26596339:+ chr17 26596033-26596339 + | 30.6125
## chr17:26645157-26645514:+ chr17 26645157-26645514 + | 585.4393
## ... ... ... ... . ...
## chr17:45534727-45534729:- chr17 45534727-45534729 - | 0.00000
## chr17:45545922-45545996:- chr17 45545922-45545996 - | 208.58390
## chr17:45554314-45554345:- chr17 45554314-45554345 - | 8.31445
## chr17:45700092-45700187:- chr17 45700092-45700187 - | 6.37016
## chr17:45901695-45901752:- chr17 45901695-45901752 - | 132.65464
## dominant_ctss nr_ctss annotation genes q_0.1
## <CTSS> <integer> <Rle> <Rle> <Rle>
## chr17:26453647-26453719:+ chr17:26453701:+ 22 promoter ttc7b 21
## chr17:26564524-26564591:+ chr17:26564585:+ 27 promoter nrde2 1
## chr17:26595673-26595750:+ chr17:26595750:+ 34 promoter larp1b 12
## chr17:26596033-26596339:+ chr17:26596198:+ 57 promoter larp1b 38
## chr17:26645157-26645514:+ chr17:26645160:+ 92 promoter pgrmc2 1
## ... ... ... ... ... ...
## chr17:45534727-45534729:- chr17:45534727:- 3 intron znf106a 1
## chr17:45545922-45545996:- chr17:45545991:- 32 promoter znf106a 24
## chr17:45554314-45554345:- chr17:45554339:- 6 promoter tmem206 26
## chr17:45700092-45700187:- chr17:45700182:- 8 exon susd4 4
## chr17:45901695-45901752:- chr17:45901749:- 22 promoter arf6b 4
## q_0.9 interquantile_width tpm
## <Rle> <Rle> <numeric>
## chr17:26453647-26453719:+ 57 37 19.1354
## chr17:26564524-26564591:+ 65 65 96.9145
## chr17:26595673-26595750:+ 78 67 177.6584
## chr17:26596033-26596339:+ 272 235 30.6125
## chr17:26645157-26645514:+ 109 109 585.4393
## ... ... ... ...
## chr17:45534727-45534729:- 1 1 0.00000
## chr17:45545922-45545996:- 70 47 208.58390
## chr17:45554314-45554345:- 32 7 8.31445
## chr17:45700092-45700187:- 93 90 6.37016
## chr17:45901695-45901752:- 55 52 132.65464
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genomeThis will, in addition to genomic coordinates of the consensus
clusters, which are constant across all samples, also return the
position of the dominant TSS, the CAGE signal (tpm) and the
interquantile width specific for a given sample. Note that when
specifying individual sample, only the consensus clusters that have some
CAGE signal in that sample will be returned (which will be a subset of
all consensus clusters). When setting sample = NULL
sample-agnostic information per consensus cluster is provided. This
includes the interquantile width and dominant TSS information for each
consensus cluster independent of the samples when specifying
interquantile boundaries qLow and qUp.
Track export for genome browsers
CAGE data can be visualized in the genomic context by converting raw or normalized CAGE tag counts to a track object and exporting it to a file format such as BED, bedGraph or BigWig for uploading (or linking) to a genome browser`4. The (exportToTrack) function can take a variety of inputs representing CTSS, Tag Clusters or Consensus Clusters, with raw or normalised expression scores. When asked to export multiple samples it will return a list of tracks.
trk <- exportToTrack(CTSSnormalizedTpmGR(ce, "Zf.30p.dome"))
ce |> CTSSnormalizedTpmGR("all") |> exportToTrack(ce, oneTrack = FALSE)## GRangesList object of length 4:
## [[1]]
## UCSC track 'Zf.unfertilized.egg (TC)'
## UCSCData object with 8395 ranges and 6 metadata columns:
## seqnames ranges strand | genes annotation filteredCTSSidx
## <Rle> <IRanges> <Rle> | <Rle> <Rle> <Rle>
## [1] chr17 26050540 + | grid1a promoter FALSE
## [2] chr17 26391265 + | si:ch73-34j14.2 exon FALSE
## [3] chr17 26446219 + | unknown FALSE
## [4] chr17 26453605 + | promoter TRUE
## [5] chr17 26453632 + | promoter TRUE
## ... ... ... ... . ... ... ...
## [8391] chr17 45901781 - | arf6b promoter FALSE
## [8392] chr17 45901784 - | arf6b promoter TRUE
## [8393] chr17 45901800 - | arf6b promoter FALSE
## [8394] chr17 45901814 - | arf6b promoter TRUE
## [8395] chr17 45901816 - | arf6b promoter TRUE
## cluster score itemRgb
## <Rle> <numeric> <character>
## [1] 0.658379 grey50
## [2] 0.658379 grey50
## [3] 0.658379 grey50
## [4] 1.303748 black
## [5] 1.303748 black
## ... ... ... ...
## [8391] 0.658379 grey50
## [8392] 0.658379 black
## [8393] 0.658379 grey50
## [8394] 1.303748 black
## [8395] 1.944295 black
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genome
##
## ...
## <3 more elements>Some track file format, for instance bigWig or
bedGraph require the + and - strands
to be separated, because they do not allow overlapping ranges. This can
be done with the (split) function like in the following example5.
## GRangesList object of length 2:
## $`+`
## UCSC track 'Zf.30p.dome (TC)'
## UCSCData object with 3778 ranges and 6 metadata columns:
## seqnames ranges strand | genes annotation filteredCTSSidx
## <Rle> <IRanges> <Rle> | <Rle> <Rle> <Rle>
## [1] chr17 26222417 + | unknown FALSE
## [2] chr17 26323229 + | unknown FALSE
## [3] chr17 26453603 + | promoter TRUE
## [4] chr17 26453615 + | promoter FALSE
## [5] chr17 26453632 + | promoter TRUE
## ... ... ... ... . ... ... ...
## [3774] chr17 45975288 + | unknown TRUE
## [3775] chr17 45975289 + | unknown TRUE
## [3776] chr17 45975290 + | unknown TRUE
## [3777] chr17 45975292 + | unknown TRUE
## [3778] chr17 45975293 + | unknown TRUE
## cluster score itemRgb
## <Rle> <numeric> <character>
## [1] 0.680723 grey50
## [2] 0.680723 grey50
## [3] 1.394796 black
## [4] 0.680723 grey50
## [5] 2.122024 black
## ... ... ... ...
## [3774] chr17:45975252-45975.. 10.44998 black
## [3775] chr17:45975252-45975.. 1.39480 black
## [3776] chr17:45975252-45975.. 4.34801 black
## [3777] chr17:45975252-45975.. 1.39480 black
## [3778] chr17:45975252-45975.. 2.85793 black
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genome
##
## $`-`
## UCSC track 'Zf.30p.dome (TC)'
## UCSCData object with 3499 ranges and 6 metadata columns:
## seqnames ranges strand | genes annotation filteredCTSSidx cluster
## <Rle> <IRanges> <Rle> | <Rle> <Rle> <Rle> <Rle>
## [1] chr17 26068225 - | unknown FALSE
## [2] chr17 26068227 - | unknown FALSE
## [3] chr17 26068233 - | unknown FALSE
## [4] chr17 26074127 - | unknown TRUE
## [5] chr17 26113371 - | unknown FALSE
## ... ... ... ... . ... ... ... ...
## [3495] chr17 45901810 - | arf6b promoter FALSE
## [3496] chr17 45901814 - | arf6b promoter TRUE
## [3497] chr17 45901816 - | arf6b promoter TRUE
## [3498] chr17 45975041 - | unknown FALSE
## [3499] chr17 45999921 - | unknown FALSE
## score itemRgb
## <numeric> <character>
## [1] 0.680723 grey50
## [2] 0.680723 grey50
## [3] 0.680723 grey50
## [4] 1.394796 black
## [5] 0.680723 grey50
## ... ... ...
## [3495] 0.680723 grey50
## [3496] 0.680723 black
## [3497] 0.680723 black
## [3498] 0.680723 grey50
## [3499] 0.680723 grey50
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genomeFor bigWig export, the (rtracklayer::export.bw) needs to be run on each element of the list returned by the (split) command.
For bedGraph export, the (rtracklayer::export.bedGraph) command can take the list as input and will produce a single file containing the two tracks. (Figure @ref(fig:CTSSbedGraph)) shows an example of bedGraph visualisation.
For BED export, the (rtracklayer::export.bed) can operate directly on the track object.
Other export format probably operate in a way similar to one of the cases above.
Interquantile width can also be visualized in a gene-like representation in the genome browsers by passing quantile information during data conversion to the UCSCData format and then exporting it into a BED file:
## GRangesList object of length 4:
## $Zf.unfertilized.egg
## UCSC track 'TC'
## UCSCData object with 517 ranges and 8 metadata columns:
## seqnames ranges strand | score nr_ctss q_0.1 q_0.9
## <Rle> <IRanges> <Rle> | <numeric> <integer> <Rle> <Rle>
## [1] chr17 26453632-26453708 + | 26.9709 12 36 72
## [2] chr17 26564508-26564610 + | 128.6372 24 17 81
## [3] chr17 26595637-26595793 + | 216.9994 35 37 114
## [4] chr17 26596033-26596091 + | 10.4200 9 1 50
## [5] chr17 26596118-26596127 + | 12.1995 4 1 10
## ... ... ... ... . ... ... ... ...
## [513] chr17 45700182-45700187 - | 9.61820 3 1 6
## [514] chr17 45901329-45901330 - | 1.96213 2 1 2
## [515] chr17 45901698-45901710 - | 27.65446 4 1 2
## [516] chr17 45901732-45901784 - | 119.96945 15 2 21
## [517] chr17 45901814-45901816 - | 3.24804 2 1 3
## interquantile_width thick name blocks
## <Rle> <IRanges> <logical> <IRangesList>
## [1] 37 26453667 <NA> 1,36-72,77
## [2] 65 26564585 <NA> 1,17-81,103
## [3] 78 26595750 <NA> 1,37-114,157
## [4] 50 26596070 <NA> 1-50,59
## [5] 10 26596118 <NA> 1-10
## ... ... ... ... ...
## [513] 6 45700182 <NA> 1-6
## [514] 2 45901329 <NA> 1-2
## [515] 2 45901698 <NA> 1-2,13
## [516] 20 45901749 <NA> 1,2-21,53
## [517] 3 45901816 <NA> 1-3
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genome
##
## ...
## <3 more elements>In this gene-like representation (Figure @ref(fig:tagClustersBed)), the oriented line shows the full span of the cluster, filled block marks the interquantile width and a single base-pair thick block denotes the position of the dominant TSS.
Tag clusters visualization in the genome browser
Expression profiling
The CAGE signal is a quantitative measure of promoter activity. In
CAGEr, normalised expression scores of individual CTSSs or
consensus clusters can be clustered in expression classes. Two
unsupervised clustering algorithms are supported: kmeans and
self-organizing maps (SOM). Both require to specify a number of clusters
in advance. Results are stored in the exprClass
metadata column of the CTSS or consensus clusters genomic
ranges, and the expressionClass accessor function is
provided for convenience.
In the example below, we perform expression clustering at the level of entire promoters using SOM algorithm with 4 × 2 dimensions and applying it only to consensus clusters with a normalized CAGE signal of at least 10 TPM in at least one sample.
ce <- getExpressionProfiles(ce, what = "consensusClusters", tpmThreshold = 10,
nrPassThreshold = 1, method = "som", xDim = 4, yDim = 2)
consensusClustersGR(ce)$exprClass |> table(useNA = "always")##
## 0_0 0_1 1_0 1_1 2_0 2_1 3_0 3_1 <NA>
## 46 49 25 19 15 5 6 45 75Distribution of expression across samples for the 8 clusters returned
by SOM can be visualized using the plotExpressionProfiles
function as shown in
Figure @ref(fig:ConsensusClustersExpressionProfiles):
## Warning in ggplot2::scale_x_log10(): log-10 transformation introduced infinite
## values.## Warning: Removed 103 rows containing non-finite outside the scale range
## (`stat_ydensity()`).
Expression clusters
Each cluster is shown in different color and is marked by its label and the number of elements (promoters) in the cluster. We can extract promoters belonging to a specific cluster by typing commands like:
## ConsensusClusters object with 49 ranges and 8 metadata columns:
## seqnames ranges strand |
## <Rle> <IRanges> <Rle> |
## chr17:26645157-26645514:+ chr17 26645157-26645514 + |
## chr17:26651964-26652050:+ chr17 26651964-26652050 + |
## chr17:28161574-28161757:+ chr17 28161574-28161757 + |
## chr17:28670871-28670986:+ chr17 28670871-28670986 + |
## chr17:28683436-28683585:+ chr17 28683436-28683585 + |
## ... ... ... ... .
## chr17:43639501-43639675:- chr17 43639501-43639675 - |
## chr17:43910083-43910371:- chr17 43910083-43910371 - |
## chr17:44487317-44487409:- chr17 44487317-44487409 - |
## chr17:45175977-45175990:- chr17 45175977-45175990 - |
## chr17:45545922-45545996:- chr17 45545922-45545996 - |
## score dominant_ctss nr_ctss
## <Rle> <CTSS> <integer>
## chr17:26645157-26645514:+ 2818.40482968203 chr17:26645160:+ 92
## chr17:26651964-26652050:+ 72.8417558520881 chr17:26652002:+ 13
## chr17:28161574-28161757:+ 1305.40900274215 chr17:28161692:+ 53
## chr17:28670871-28670986:+ 3142.3064841607 chr17:28670882:+ 52
## chr17:28683436-28683585:+ 822.702991202557 chr17:28683496:+ 44
## ... ... ... ...
## chr17:43639501-43639675:- 297.617148143507 chr17:43639621:- 39
## chr17:43910083-43910371:- 2488.62120758588 chr17:43910245:- 94
## chr17:44487317-44487409:- 1619.09807160225 chr17:44487371:- 37
## chr17:45175977-45175990:- 35.166801237872 chr17:45175986:- 4
## chr17:45545922-45545996:- 919.561599189012 chr17:45545991:- 32
## annotation genes q_0.1 q_0.9 exprClass
## <Rle> <Rle> <Rle> <Rle> <Rle>
## chr17:26645157-26645514:+ promoter pgrmc2 1 110 0_1
## chr17:26651964-26652050:+ exon pgrmc2 22 81 0_1
## chr17:28161574-28161757:+ promoter TMEM30B 64 181 0_1
## chr17:28670871-28670986:+ promoter MIS18BP1 3 65 0_1
## chr17:28683436-28683585:+ promoter heatr5a 49 77 0_1
## ... ... ... ... ... ...
## chr17:43639501-43639675:- promoter zfyve28 90 164 0_1
## chr17:43910083-43910371:- promoter ahsa1l 115 252 0_1
## chr17:44487317-44487409:- promoter exoc5 1 70 0_1
## chr17:45175977-45175990:- promoter fam161b 10 14 0_1
## chr17:45545922-45545996:- promoter znf106a 27 70 0_1
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genomeConsensus clusters and information on their expression profile can be exported to a BED file, which allows visualization of the promoters in the genome browser colored in the color of the expression cluster they belong to (Figure @ref(fig:ConsensusClustersBed):
cc_iqtrack <- exportToTrack(ce, what = "consensusClusters", colorByExpressionProfile = TRUE)
cc_iqtrack## UCSC track 'TC'
## UCSCData object with 285 ranges and 9 metadata columns:
## seqnames ranges strand | score nr_ctss annotation
## <Rle> <IRanges> <Rle> | <numeric> <integer> <Rle>
## [1] chr17 26453647-26453719 + | 174.694 22 promoter
## [2] chr17 26564524-26564591 + | 308.691 27 promoter
## [3] chr17 26595673-26595750 + | 891.068 34 promoter
## [4] chr17 26596033-26596339 + | 321.610 57 promoter
## [5] chr17 26645157-26645514 + | 2818.405 92 promoter
## ... ... ... ... . ... ... ...
## [281] chr17 45534727-45534729 - | 176.5030 3 intron
## [282] chr17 45545922-45545996 - | 919.5616 32 promoter
## [283] chr17 45554314-45554345 - | 44.0059 6 promoter
## [284] chr17 45700092-45700187 - | 39.7368 8 exon
## [285] chr17 45901695-45901752 - | 846.5649 22 promoter
## genes q_0.1 q_0.9 exprClass thick name
## <Rle> <Rle> <Rle> <Rle> <IRanges> <logical>
## [1] ttc7b 21 57 1_1 26453701 <NA>
## [2] nrde2 1 64 0_0 26564585 <NA>
## [3] larp1b 12 78 1_0 26595750 <NA>
## [4] larp1b 34 266 1_0 26596198 <NA>
## [5] pgrmc2 1 110 0_1 26645160 <NA>
## ... ... ... ... ... ... ...
## [281] znf106a 1 3 3_1 45534727 <NA>
## [282] znf106a 27 70 0_1 45545991 <NA>
## [283] tmem206 1 32 2_0 45554339 <NA>
## [284] susd4 4 93 <NA> 45700182 <NA>
## [285] arf6b 4 55 1_1 45901749 <NA>
## -------
## seqinfo: 26 sequences (1 circular) from danRer7 genome
Consensus clusters colored by expression profile in the genome browser
Expression profiling of individual TSSs is done using the same
procedure as described above for consensus clusters, only by setting
wha = "CTSS" in all of the functions.
Differential expression analysis
The raw expression table for the consensus clusters can be exported to the DESeq2 package for differential expression analysis. For this, the column data needs to contain factors that can group the samples. They can have any name.
Shifting promoters
As shown in Figure @ref(fig:tagClustersBed), TSSs within the same promoter region can be used differently in different samples. Thus, although the overall transcription level from a promoter does not change between the samples, the differential usage of TSSs or promoter shifting may indicate changes in the regulation of transcription from that promoter, which cannot be detected by expression profiling. To detect this promoter shifting, a method described in @[Haberle:2014] has been implemented in CAGEr. Shifting can be detected between two individual samples or between two groups of samples. In the latter case, samples are first merged into groups and then compared in the same way as two individual samples. For all promoters a shifting score is calculated based on the difference in the cumulative distribution of CAGE signal along that promoter in the two samples. In addition, a more general assessment of differential TSS usage is obtained by performing Kolmogorov-Smirnov test on the cumulative distributions of CAGE signal, as described below. Thus, prior to shifting score calculation and statistical testing, we have to calculate cumulative distribution along all consensus clusters:
Next, we calculate a shifting score and P-value of Kolmogorov-Smirnov test for all promoters comparing two specified samples:
ce <- scoreShift(ce, groupX = "Zf.unfertilized.egg", groupY = "Zf.prim6",
testKS = TRUE, useTpmKS = FALSE)## Warning in min(x[nrow(x), ]): no non-missing arguments to min; returning Inf## Warning in max(x[, less.tpm]): no non-missing arguments to max; returning -Inf## Warning in min(x[nrow(x), ]): no non-missing arguments to min; returning Inf## Warning in max(x[, less.tpm]): no non-missing arguments to max; returning -Inf## Warning in min(x[nrow(x), ]): no non-missing arguments to min; returning Inf## Warning in max(x[, less.tpm]): no non-missing arguments to max; returning -Inf## Warning in min(x[nrow(x), ]): no non-missing arguments to min; returning Inf## Warning in max(x[, less.tpm]): no non-missing arguments to max; returning -Inf## Warning in min(x[nrow(x), ]): no non-missing arguments to min; returning Inf## Warning in max(x[, less.tpm]): no non-missing arguments to max; returning -Inf## Warning in min(x[nrow(x), ]): no non-missing arguments to min; returning Inf## Warning in max(x[, less.tpm]): no non-missing arguments to max; returning -Inf## Warning in min(x[nrow(x), ]): no non-missing arguments to min; returning Inf## Warning in max(x[, less.tpm]): no non-missing arguments to max; returning -Inf## Warning in min(x[nrow(x), ]): no non-missing arguments to min; returning Inf## Warning in max(x[, less.tpm]): no non-missing arguments to max; returning -Inf## Warning in min(x[nrow(x), ]): no non-missing arguments to min; returning Inf## Warning in max(x[, less.tpm]): no non-missing arguments to max; returning -Inf## Warning in min(x[nrow(x), ]): no non-missing arguments to min; returning Inf## Warning in max(x[, less.tpm]): no non-missing arguments to max; returning -Inf## Warning in min(x[nrow(x), ]): no non-missing arguments to min; returning Inf## Warning in max(x[, less.tpm]): no non-missing arguments to max; returning -Inf## Warning in min(x[nrow(x), ]): no non-missing arguments to min; returning Inf## Warning in max(x[, less.tpm]): no non-missing arguments to max; returning -Inf## Warning in min(x[nrow(x), ]): no non-missing arguments to min; returning Inf## Warning in max(x[, less.tpm]): no non-missing arguments to max; returning -Inf## Warning in max(x[, "groupX"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupX"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupX"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupX"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupX"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupX"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupX"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupX"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupX"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupX"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupX"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupX"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupX"]): no non-missing arguments to max; returning -Inf## Warning in max(x[, "groupY"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupY"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupY"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupY"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupY"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupY"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupY"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupY"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupY"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupY"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupY"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupY"]): no non-missing arguments to max; returning -Inf
## Warning in max(x[, "groupY"]): no non-missing arguments to max; returning -Inf## Warning in max(cumsum.matrix[, 1]): no non-missing arguments to max; returning
## -Inf## Warning in max(cumsum.matrix[, 2]): no non-missing arguments to max; returning
## -Inf## Warning in max(abs(z)): no non-missing arguments to max; returning -Inf## Warning in max(cumsum.matrix[, 1]): no non-missing arguments to max; returning
## -Inf## Warning in max(cumsum.matrix[, 2]): no non-missing arguments to max; returning
## -Inf## Warning in max(abs(z)): no non-missing arguments to max; returning -Inf## Warning in max(cumsum.matrix[, 1]): no non-missing arguments to max; returning
## -Inf## Warning in max(cumsum.matrix[, 2]): no non-missing arguments to max; returning
## -Inf## Warning in max(abs(z)): no non-missing arguments to max; returning -Inf## Warning in max(cumsum.matrix[, 1]): no non-missing arguments to max; returning
## -Inf## Warning in max(cumsum.matrix[, 2]): no non-missing arguments to max; returning
## -Inf## Warning in max(abs(z)): no non-missing arguments to max; returning -Inf## Warning in max(cumsum.matrix[, 1]): no non-missing arguments to max; returning
## -Inf## Warning in max(cumsum.matrix[, 2]): no non-missing arguments to max; returning
## -Inf## Warning in max(abs(z)): no non-missing arguments to max; returning -Inf## Warning in max(cumsum.matrix[, 1]): no non-missing arguments to max; returning
## -Inf## Warning in max(cumsum.matrix[, 2]): no non-missing arguments to max; returning
## -Inf## Warning in max(abs(z)): no non-missing arguments to max; returning -Inf## Warning in max(cumsum.matrix[, 1]): no non-missing arguments to max; returning
## -Inf## Warning in max(cumsum.matrix[, 2]): no non-missing arguments to max; returning
## -Inf## Warning in max(abs(z)): no non-missing arguments to max; returning -Inf## Warning in max(cumsum.matrix[, 1]): no non-missing arguments to max; returning
## -Inf## Warning in max(cumsum.matrix[, 2]): no non-missing arguments to max; returning
## -Inf## Warning in max(abs(z)): no non-missing arguments to max; returning -Inf## Warning in max(cumsum.matrix[, 1]): no non-missing arguments to max; returning
## -Inf## Warning in max(cumsum.matrix[, 2]): no non-missing arguments to max; returning
## -Inf## Warning in max(abs(z)): no non-missing arguments to max; returning -Inf## Warning in max(cumsum.matrix[, 1]): no non-missing arguments to max; returning
## -Inf## Warning in max(cumsum.matrix[, 2]): no non-missing arguments to max; returning
## -Inf## Warning in max(abs(z)): no non-missing arguments to max; returning -Inf## Warning in max(cumsum.matrix[, 1]): no non-missing arguments to max; returning
## -Inf## Warning in max(cumsum.matrix[, 2]): no non-missing arguments to max; returning
## -Inf## Warning in max(abs(z)): no non-missing arguments to max; returning -Inf## Warning in max(cumsum.matrix[, 1]): no non-missing arguments to max; returning
## -Inf## Warning in max(cumsum.matrix[, 2]): no non-missing arguments to max; returning
## -Inf## Warning in max(abs(z)): no non-missing arguments to max; returning -Inf## Warning in max(cumsum.matrix[, 1]): no non-missing arguments to max; returning
## -Inf## Warning in max(cumsum.matrix[, 2]): no non-missing arguments to max; returning
## -Inf## Warning in max(abs(z)): no non-missing arguments to max; returning -InfThis function will calculate shifting score as illustrated in
Figure @ref(fig:ShiftingScore). Values of shifting score are in range
between -Inf and 1. Positive values can be
interpreted as the proportion of transcription initiation in the sample
with lower expression that is happening “outside” (either upstream or
downstream) of the region used for transcription initiation in the other
sample. In contrast, negative values indicate no physical separation,
i.e. the region used for transcription initiation in the sample
with lower expression is completely contained within the region used for
transcription initiation in the other sample. Thus, shifting score
detects only the degree of upstream or downstream shifting, but does not
detect more general changes in TSS rearrangement in the region,
e.g. narrowing or broadening of the region used for
transcription.
To assess any general change in the TSS usage within the promoter
region, a two-sample Kolmogorov-Smirnov (K-S) test on cumulative sums of
CAGE signal along the consensus cluster is performed. Cumulative sums in
both samples are scaled to range between 0 and 1 and are considered to
be empirical cumulative distribution functions (ECDF) reflecting
sampling of TSS positions during transcription initiation. K-S test is
performed to assess whether the two underlying probability distributions
differ. To obtain a P-value i.e. the level at which the
null-hypothesis can be rejected), sample sizes that generated the ECDFs
are required, in addition to actual K-S statistics calculated from
ECDFs. These are derived either from raw tag counts, i.e. exact
number of times each TSS in the cluster was sampled during sequencing
(when useTpmKS = FALSE), or from normalized tpm values
(when useTpmKS = TRUE). P-values obtained from K-S tests
are further corrected for multiple testing using Benjamini and Hochberg
(BH) method and for each P-value a corresponding false-discovery rate
(FDR) is also reported.
We can select a subset of promoters with shifting score and/or FDR above specified threshold:
# Not supported yet for CAGEexp objects, sorry.
shifting.promoters <- getShiftingPromoters(ce,
groupX = "Zf.unfertilized.egg", groupY = "Zf.prim6",
tpmThreshold = 5, scoreThreshold = 0.6,
fdrThreshold = 0.01)
head(shifting.promoters)## DataFrame with 6 rows and 10 columns
## consensus.cluster score
## <character> <Rle>
## chr17:26595673-26595750:+ chr17:26595673-26595.. 891.067717359326
## chr17:33502378-33502474:+ chr17:33502378-33502.. 44.2579848065934
## chr17:33581354-33581420:+ chr17:33581354-33581.. 85.2931212908046
## chr17:35410890-35410920:+ chr17:35410890-35410.. 302.462154410648
## chr17:37383275-37383398:+ chr17:37383275-37383.. 83.1331472328766
## chr17:37395388-37395497:+ chr17:37395388-37395.. 295.076875810843
## score
## <Rle>
## chr17:26595673-26595750:+ 891.067717359326
## chr17:33502378-33502474:+ 44.2579848065934
## chr17:33581354-33581420:+ 85.2931212908046
## chr17:35410890-35410920:+ 302.462154410648
## chr17:37383275-37383398:+ 83.1331472328766
## chr17:37395388-37395497:+ 295.076875810843
## shifting.score.Zf.unfertilized.egg.Zf.prim6
## <numeric>
## chr17:26595673-26595750:+ 0.703858
## chr17:33502378-33502474:+ 0.654196
## chr17:33581354-33581420:+ 0.602743
## chr17:35410890-35410920:+ 0.609506
## chr17:37383275-37383398:+ 0.733289
## chr17:37395388-37395497:+ 0.659035
## groupX.pos.Zf.unfertilized.egg groupY.pos.Zf.prim6
## <integer> <integer>
## chr17:26595673-26595750:+ 26595751 26595710
## chr17:33502378-33502474:+ 33502455 33502379
## chr17:33581354-33581420:+ 33581375 33581408
## chr17:35410890-35410920:+ 35410921 35410894
## chr17:37383275-37383398:+ 37383278 37383376
## chr17:37395388-37395497:+ 37395411 37395469
## groupX.tpm.Zf.unfertilized.egg groupY.tpm.Zf.prim6
## <numeric> <numeric>
## chr17:26595673-26595750:+ 188.0397 233.7861
## chr17:33502378-33502474:+ 15.2911 9.3698
## chr17:33581354-33581420:+ 22.5912 15.1074
## chr17:35410890-35410920:+ 93.1385 67.0356
## chr17:37383275-37383398:+ 14.0695 44.9775
## chr17:37395388-37395497:+ 58.4980 134.5016
## pvalue.KS.Zf.unfertilized.egg.Zf.prim6
## <numeric>
## chr17:26595673-26595750:+ 0.00000e+00
## chr17:33502378-33502474:+ 2.09475e-05
## chr17:33581354-33581420:+ 1.04406e-05
## chr17:35410890-35410920:+ 0.00000e+00
## chr17:37383275-37383398:+ 2.68232e-11
## chr17:37395388-37395497:+ 0.00000e+00
## fdr.KS.Zf.unfertilized.egg.Zf.prim6
## <numeric>
## chr17:26595673-26595750:+ 0.00000e+00
## chr17:33502378-33502474:+ 4.94267e-05
## chr17:33581354-33581420:+ 2.49150e-05
## chr17:35410890-35410920:+ 0.00000e+00
## chr17:37383275-37383398:+ 1.11803e-10
## chr17:37395388-37395497:+ 0.00000e+00The getShiftingPromoters function returns genomic
coordinates, shifting score and P-value (FDR) of the promoters, as well
as the value of CAGE signal and position of the dominant TSS in the two
compared (groups of) samples. Figure @ref(fig:ShiftingPromoter) shows
the difference in the CAGE signal between the two compared samples for
one of the selected high-scoring shifting promoters.
Enhancers
The FANTOM5 project reported that “enhancer activity can be
detected through the presence of balanced bidirectional capped
transcripts” (Andersson et al. 2014).
The CAGEr package is providing a wrapper to the
CAGEfightR package’s function quickEnhancers so
that it can run directly on CAGEexp objects. The wrapper
returns a modified CAGEexp object in which the results are
stored in its enhancers experiment slot.
## class: RangedSummarizedExperiment
## dim: 33 4
## metadata(0):
## assays(1): counts
## rownames(33): chr17:26690165-26690757 chr17:27120436-27120991 ...
## chr17:45175861-45176390 chr17:45611150-45611574
## rowData names(4): score thick balance bidirectionality
## colnames(4): Zf.unfertilized.egg Zf.high Zf.30p.dome Zf.prim6
## colData names(12): inputFiles inputFilesType ... Name totalTagsAppendix
Creating a CAGEexp object by coercing a data frame
A CAGEexp object can also be created directly by coercing a data frame containing single base-pair TSS information. To be able to do the coercion into a CAGEexp, the data frame must conform with the following:
The data frame must have at least 4 columns;
the first three columns must be named
chr,posandstrand, and contain chromosome name, 1-based genomic coordinate of the TSS (positive integer) and TSS strand information (+or-), respectively;these first three columns must be of the class
character,integerandcharacter, respectively;all additional columns must be of the class
integerand should contain raw CAGE tag counts (non-negative integer) supporting each TSS in different samples (columns). At least one such column with tag counts must be present;the names of the columns containing tag counts must begin with a letter, and these column names are used as sample labels in the resulting CAGEexp object.
An example of such data frame is shown below:
TSS.df <- read.table(system.file( "extdata/Zf.unfertilized.egg.chr17.ctss"
, package = "CAGEr"))
# make sure the column names are as required
colnames(TSS.df) <- c("chr", "pos", "strand", "Zf.unfertilized.egg")
# make sure the column classes are as required
TSS.df$chr <- as.character(TSS.df$chr)
TSS.df$pos <- as.integer(TSS.df$pos)
TSS.df$strand <- as.character(TSS.df$strand)
TSS.df$Zf.unfertilized.egg <- as.integer(TSS.df$Zf.unfertilized.egg)
head(TSS.df)## chr pos strand Zf.unfertilized.egg
## 1 chr17 26050540 + 1
## 2 chr17 26074127 - 2
## 3 chr17 26074129 - 3
## 4 chr17 26222545 - 1
## 5 chr17 26322780 - 1
## 6 chr17 26322832 - 2This data.frame can now be coerced to a CAGEexp object, which will fill the corresponding slots of the object with provided TSS information:
## A CAGEexp object of 1 listed
## experiment with a user-defined name and respective class.
## Containing an ExperimentList class object of length 1:
## [1] tagCountMatrix: RangedSummarizedExperiment with 8395 rows and 1 columns
## Functionality:
## experiments() - obtain the ExperimentList instance
## colData() - the primary/phenotype DataFrame
## sampleMap() - the sample coordination DataFrame
## `$`, `[`, `[[` - extract colData columns, subset, or experiment
## *Format() - convert into a long or wide DataFrame
## assays() - convert ExperimentList to a SimpleList of matrices
## exportClass() - save data to flat filesSummary of the CAGEr accessor functions
Originally there was one accessor per slot in CAGEset objects (the original CAGEr format), but now that I added the CAGEexp class, that uses different underlying formats, the number of accessors increased because a) I provide the old ones for backwards compatibility and b) there multiple possible output formats.
Before releasing this CAGEr update in Bioconductor, I would like to be sure that the number of accessors and the name scheme are good enough.
Please let me know your opinion about the names and scope of the accessors below:
CTSS data
| Name | Output |
|---|---|
| CTSScoordinatesGR | Coordinate table in GRanges format. |
| CTSStagCountDF | Raw CTSS counts in integer Rle DataFrame format. |
| CTSStagCountGR | Raw CTSS counts in GRanges format (single samples). |
| CTSStagCountSE | RangedSummarizedExperiment containing an assay for the Raw CTSS counts. |
| CTSSnormalizedTpmDF | Normalised CTSS values in Rle DataFrame format. |
| CTSSnormalizedTpmGR | Normalised CTSS values in GRanges format (single samples). |
Cluster data
| Name | Output |
|---|---|
| consensusClustersDESeq2 | Consensus cluster coordinates and expression matrix in DESeq2 format. |
| consensusClustersGR | Consensus cluster coordinates in GRanges format. |
| consensusClustersSE | Consensus cluster coordinates and expression matrix in RangedSummarizedExperiment format. |
| consensusClustersTpm | Consensus cluster coordinates and raw expression matrix. |
| tagClustersGR | Per-sample GRangesList of tag cluster coordinates. |
Gene data
| Name | Output |
|---|---|
| GeneExpDESeq2 | Gene expression data in DESeq2 format. |
| GeneExpSE | Gene expression data in SummarizedExperiment format. |
Summary of the CAGEexp experiment slots and assays
A CAGEexp object can contain the following experiments.
Please let me know your opinion about the names
| Name | Assays | Comment |
|---|---|---|
| tagCountMatrix | counts, normalizedTpmMatrix | RangedSummarizedExperiment |
| seqNameTotals | counts, norm | SummarizedExperiment |
| consensusClusters | counts, normalized, q_x, q_y | RangedSummarizedExperiment |
| geneExpMatrix | counts | SummarizedExperiment |
CAGEexp assays
| Name | Experiment | Comment |
|---|---|---|
| counts | tagCountMatrix | Integer Rle DataFrame of CTSS raw counts. |
| counts | seqNameTotals | Numeric matrix of total counts per chromosome. |
| counts | consensusClusters | Integer matrix of consensus cluster expression counts. |
| counts | geneExpMatrix | Integer matrix of gene expression counts. |
| normalizedTpmMatrix | tagCountMatrix | Numeric matrix of normalised CTSS expression scores. |
| norm | seqNameTotals | Numeric matrix of percent total counts per chromosome. |
| normalized | consensusClusters | Numeric matrix of normalised CC expression scores. |
| q_x, q_y, q_z, … | consensusClusters | Interger Rle DataFrame of relative quantile positions |
Summary of the CAGEr classes
The CTSS, CTSS.chr, TagCluster and ConsensusClsuters are mostly used internally or type safety and preventing me (Charles) from mixing up inputs. They are visible from the outside. Should they be used more extensively ? Can they be replaced by more “core” Bioconductor classes ?
| Name | Comment |
|---|---|
| CAGEset | The original CAGEr class, based on data frames and matrices. |
| CAGEexp | The new CAGEr class, based on GRanges, DataFrames, etc. |
| CAGEr | Union class for functions that accept both CAGEset and CAGEexp. |
| CTSS | Wraps GRanges and guarantees that width equals 1. |
| CTSS.chr | Same as CTSS but also guarantees the there is only one chromosome (useful in some loops) |
| TagClusters | Wraps GRanges, represents the fact that each sample has their own tag clusters. |
| ConsensusClusters | Wraps GRanges, represents the fact that they are valid for all the samples. |
| CAGErCluster | Union class for functions that accept both TagClusters and ConsensusClusters. |
Paired-end CAGE read alignment with the nf-core/rnaseq pipeline
The modern CAGE protocols starting from nAnTi-CAGE (Murata et al. 2014) onward can be sequenced paired-end when they are random-primed. Many aligners can map the read pairs but it is important to pay attention to the way they encode the existence of unmapped extra G bases in their output (typically in BAM format).
CAGEr is able to read the BAM files of the HiSAT2 aligner produced by the nf-co.re/rnaseq pipeline. One of the benefits of using a full pipeline to produce the alignment files is that the results will include some quality controls that can be used to identify defects before investing more time in the CAGEr analysis. Optionally, the first 6 or 9 bases (depending on the protocol) of Read 2 may be clipped, as they originate from the random primer and not from the RNA. However, forgetting to do so has very little impact on the results.
Session info
## R version 4.4.1 (2024-06-14)
## Platform: x86_64-pc-linux-gnu
## Running under: Ubuntu 24.04.1 LTS
##
## Matrix products: default
## BLAS: /usr/lib/x86_64-linux-gnu/openblas-pthread/libblas.so.3
## LAPACK: /usr/lib/x86_64-linux-gnu/openblas-pthread/libopenblasp-r0.3.26.so; LAPACK version 3.12.0
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
## [3] LC_TIME=en_US.UTF-8 LC_COLLATE=C
## [5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=en_US.UTF-8 LC_NAME=C
## [9] LC_ADDRESS=C LC_TELEPHONE=C
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
##
## time zone: Etc/UTC
## tzcode source: system (glibc)
##
## attached base packages:
## [1] stats4 stats graphics grDevices utils datasets methods
## [8] base
##
## other attached packages:
## [1] BSgenome.Drerio.UCSC.danRer7_1.4.0 BSgenome_1.73.1
## [3] rtracklayer_1.65.0 BiocIO_1.15.2
## [5] Biostrings_2.73.2 XVector_0.45.0
## [7] FANTOM3and4CAGE_1.41.0 CAGEr_2.13.0
## [9] MultiAssayExperiment_1.31.5 SummarizedExperiment_1.35.5
## [11] Biobase_2.65.1 GenomicRanges_1.57.2
## [13] GenomeInfoDb_1.41.2 IRanges_2.39.2
## [15] S4Vectors_0.43.2 BiocGenerics_0.51.3
## [17] MatrixGenerics_1.17.1 matrixStats_1.4.1
## [19] BiocStyle_2.33.1
##
## loaded via a namespace (and not attached):
## [1] splines_4.4.1 bitops_1.0-9 filelock_1.0.3
## [4] tibble_3.2.1 XML_3.99-0.17 rpart_4.1.23
## [7] lifecycle_1.0.4 httr2_1.0.5 formula.tools_1.7.1
## [10] lattice_0.22-6 ensembldb_2.29.1 MASS_7.3-61
## [13] backports_1.5.0 magrittr_2.0.3 Hmisc_5.2-0
## [16] sass_0.4.9 rmarkdown_2.28 jquerylib_0.1.4
## [19] yaml_2.3.10 Gviz_1.49.0 DBI_1.2.3
## [22] buildtools_1.0.0 RColorBrewer_1.1-3 abind_1.4-8
## [25] zlibbioc_1.51.2 AnnotationFilter_1.31.0 biovizBase_1.53.0
## [28] RCurl_1.98-1.16 nnet_7.3-19 VariantAnnotation_1.51.2
## [31] rappdirs_0.3.3 GenomeInfoDbData_1.2.13 maketools_1.3.1
## [34] vegan_2.6-8 permute_0.9-7 codetools_0.2-20
## [37] DelayedArray_0.31.14 xml2_1.3.6 tidyselect_1.2.1
## [40] CAGEfightR_1.25.0 ggseqlogo_0.2 UCSC.utils_1.1.0
## [43] farver_2.1.2 BiocFileCache_2.13.2 base64enc_0.1-3
## [46] GenomicAlignments_1.41.0 jsonlite_1.8.9 Formula_1.2-5
## [49] tools_4.4.1 progress_1.2.3 stringdist_0.9.12
## [52] Rcpp_1.0.13 glue_1.8.0 gridExtra_2.3
## [55] SparseArray_1.5.45 BiocBaseUtils_1.7.3 DESeq2_1.45.3
## [58] xfun_0.48 mgcv_1.9-1 dplyr_1.1.4
## [61] withr_3.0.2 BiocManager_1.30.25 fastmap_1.2.0
## [64] latticeExtra_0.6-30 fansi_1.0.6 digest_0.6.37
## [67] R6_2.5.1 colorspace_2.1-1 gtools_3.9.5
## [70] jpeg_0.1-10 dichromat_2.0-0.1 biomaRt_2.61.3
## [73] RSQLite_2.3.7 utf8_1.2.4 generics_0.1.3
## [76] data.table_1.16.2 prettyunits_1.2.0 httr_1.4.7
## [79] htmlwidgets_1.6.4 S4Arrays_1.5.11 som_0.3-5.2
## [82] pkgconfig_2.0.3 gtable_0.3.6 blob_1.2.4
## [85] sys_3.4.3 htmltools_0.5.8.1 ProtGenerics_1.37.1
## [88] scales_1.3.0 png_0.1-8 knitr_1.48
## [91] rstudioapi_0.17.1 reshape2_1.4.4 rjson_0.2.23
## [94] checkmate_2.3.2 nlme_3.1-166 curl_5.2.3
## [97] cachem_1.1.0 stringr_1.5.1 operator.tools_1.6.3
## [100] KernSmooth_2.23-24 parallel_4.4.1 foreign_0.8-87
## [103] AnnotationDbi_1.69.0 restfulr_0.0.15 pillar_1.9.0
## [106] grid_4.4.1 vctrs_0.6.5 VGAM_1.1-12
## [109] dbplyr_2.5.0 cluster_2.1.6 htmlTable_2.4.3
## [112] evaluate_1.0.1 GenomicFeatures_1.57.1 locfit_1.5-9.10
## [115] cli_3.6.3 compiler_4.4.1 Rsamtools_2.21.2
## [118] rlang_1.1.4 crayon_1.5.3 labeling_0.4.3
## [121] interp_1.1-6 plyr_1.8.9 stringi_1.8.4
## [124] deldir_2.0-4 BiocParallel_1.39.0 assertthat_0.2.1
## [127] munsell_0.5.1 lazyeval_0.2.2 Matrix_1.7-1
## [130] hms_1.1.3 bit64_4.5.2 ggplot2_3.5.1
## [133] KEGGREST_1.45.1 highr_0.11 memoise_2.0.1
## [136] bslib_0.8.0 bit_4.5.0References
Data can also be accessed directly using the native methods of the
MultiAssayExperimentandSummarizedExperimentclasses, for examplece[["tagCountMatrix"]],rowRanges(ce[["tagCountMatrix"]])andassay(ce[["tagCountMatrix"]]).↩︎Alternatively, the
plotCorrelation()function does the same and colors the scatterplots according to point density, but is much slower.↩︎Note that since this example dataset contains only data from one part of chromosome 17 and the total number of tags is very small, we normalize to a referent distribution with a similarly small number of tags. When analyzing full datasets it is reasonable to set total number of tags for referent distribution to one million to get normalized tags per million values.↩︎
Note that the ZENBU genome browser can also display natively data from BAM or BED files as coverage tracks.↩︎
The
drop = TRUEoption is needed to remove the*level.↩︎
- Introduction
- Input data for CAGEr
- The
CAGEr workflow
- Getting started
- Creating a CAGEexp object
- Reading in the data
- Quality controls and preliminary analyses
- Merging of replicates
- Normalization
- CTSS flagging
- CTSS clustering
- Promoter width
- Creating consensus promoters across samples
- Track export for genome browsers
- Expression profiling
- Differential expression analysis
- Shifting promoters
- Enhancers
- Appendix
- Session info
- References